Stroboscope light bulb works is what? 
  Stroboscope light bulb is made of special hard glass or quartz glass tube, with a high temperature of the glass at both ends by a special process hits package forming, stroboscope lamp filled with high purity specialty gases in the tube around the outside a metal wire, or the development of special coated film made of a gas discharge lamp. 
  Stroboscope light bulbs work, you need a matching circuit assembly several times to luminous work. Circuit and function of each part as follows: 
  1 capacitor C3 is stroboscope discharge light bulbs for the storage of electricity, which is powered by a DC power supply V 
  2 the capacitor Ct is stored energy is triggered, the voltage divider consisting of the resistors R1 and R2, resulting in the partial pressure of Vt, charge the capacitor Ct. The trigger coil Vt value is the primary input voltage. 
  3 the primary trigger coil T2 line group is connected to control switch S, and the circuit composed of a capacitor Ct, and the secondary winding of the trigger wire between the groups, and the trigger wire is connected to the flash tube. 
  4 When the switch S is closed, Ct electricity stored in the primary coil to trigger release. So there are several thousand volts above the primary high-voltage pulse sensor output, the role of the stroboscope light bulbs trigger pole up. 
  5 The high-voltage pulse to the stroboscope ionized xenon bulb, and the bulb inside the electrode ionization and ionization electrodes are formed inside the bulb is turned on. 
  6 ionization conduction resistance of the inner bulb plummeted, leading to the storage capacitor Cs discharge bulb. 
  7 capacitor Cs strong power within the tube into avalanche ionization, an arc discharge state, generating intense light output. Discharge to Cs voltage sag. Down to a certain extent, can not be maintained avalanche ionization, so electric pulse discharge status stop lamp goes out.